Order Before 12 Noon for Guaranteed Same-Day Dispatch*

How To Apply UV DTF

For best results once your design has been apply, avoid touching or washing for 24hours.

Trim the Transfer

 

Cut around the edges of the design for easier placement. No weeding required!

Knife available here

Firm Scraping


Using a squeegee or flat scraper, firmly press and scrape over the surface of the transfer to remove air bubbles and ensure strong adhesion of the transfer to the surface.

Clean the Surface

 

Use isopropyl alcohol or a mild cleaner to remove dust, oils, and debris. The cleaner the surface, the better the adhesion.

Peel the Backing Film

 

Slowly remove the opaque backing film to reveal the adhesive side of the transfer

Place and Press

 

Position the sticky side of the transfer on your item. Press down firmly.
Use a squeegee or firm card to push out any air bubbles or wrinkles.

Peel the Top Film

 

Slowly peel away the top film layer to reveal your design, If for any reason your design hasn't fully adhered to your item please continue applying more presure, focusing on the outer edge and any small detail to ensure full adherence with your item.

Search
Your cart is empty
Search